REFERENCE PHOTOS - PORSCHE 911 GT3 RSR (997)

These photos are for clarification purposes and to assist racers with the Rule Set and the parts as provided in the homologated Scaleauto RTR cars and kits per Art. 7.1.0.(a).

SC Porsche RTR Chassis - 3/4 View Front

The complete and assembled chassis as it comes from Scaleauto. The wheel inserts & body mounts would be painted on the Flying Lizard car.

SC Porsche RTR Chassis - 3/4 View Rear

This is the SC0012 yellow can motor @25,000rpm. For some reason Scaleauto did not paint the can yellow in the RTR kits.

SC Porsche RTR Chassis - Top View

SC Porsche RTR Chassis - Bottom View

BODY & INTERIOR

All body parts must be used and it is as simple as this, if you can see it in these pics it has to be on your car at TC. No dremelling or sanding of the body or body parts is permitted.

SC Porsche Interior - SC 7605 - Front View

This is the prepainted interior that can be purchased. It is the same prepainted interior that is fitted to the Flying Lizard RTR car.

SC Porsche Interior - SC 7605 -Rear View

If you are building the interior from the white kit, your build should include all of the parts that you see here to meet TC.

SC Porsche Interior - SC 7605 - Front View

If the complete, painted interior weighs less than 9g then perhaps something is missing or the driver may have lost some weight ;)

SC Porsche - SC 7605 -Bottom View

SC Porsche - Front View

SC Porsche Body - Rear View

SC Porsche Body - Total Weight w body mounts & screws

If the total body weight is much less than 49g then something may have got missed in the build. Minimum weight at TC is 50g.

SC Porsche - Bottom View with body mounts & screws

If you can see it in the pics it has to be on your car at TC. Neither the body or body parts can be dremelled.

SC Porsche Body - Front Elevation

Continued on Next Page - Click Here

SC Porsche - Rear Elevation

Rule Set: Art.7.1.6(d) The stock rear wing uprights may be replaced or reinforced with rubber parts of equal or like shape.